How to measure space correctly

JOLNIRA · MEASUREMENT GUIDE

How to Measure Spaces Correctly

Practical tips for checking dimensions, access, passages, and operating space before purchasing furniture and home accessories.

Jolnira · Guide for customers in Italy

Measure Before You Buy

A complete measurement should consider not only the space where the furniture will be placed, but also the entire delivery route, the opening of doors and drawers, the presence of skirting boards, doors, windows, pipes, and the space required for assembly. Customers are encouraged to compare all measurements taken with the product dimensions and, when available, with the packaging dimensions.

1. Prepare the Necessary Tools

Before you start, it is advisable to prepare suitable tools and record the measurements neatly. Measurements taken without a written reference can easily be confused or recorded incorrectly.

Recommended tools include:

  • a rigid or flexible tape measure of adequate length;
  • a laser measure, when used correctly;
  • a pencil and paper to create a simplified floor plan;
  • removable adhesive tape to mark the footprint;
  • a spirit level to check floors, walls, and surfaces;
  • a phone or camera to document access points and obstacles.

Measurements should be recorded in the same unit, preferably centimeters, clearly indicating width, height, and depth.

For large furniture, it is advisable to repeat each measurement at least twice.

2. Measure the Room

The room should be measured considering the actually usable dimensions, not just the theoretical ones shown on a floor plan.

The following should be measured:

  • the length of each wall;
  • the overall width of the room;
  • the height from the floor to the ceiling;
  • any alcoves, recesses, and protrusions;
  • the position and size of doors and windows;
  • sloping ceilings or non-perpendicular walls;
  • the space occupied by existing furniture.

The height and width should be measured at multiple points, as floors, ceilings, and walls may not be perfectly uniform.

When measurements differ, the smallest available dimension should be used as a reference.

3. Measure the Destination Wall

The wall where the furniture will be placed should be measured separately, taking into account all elements that reduce its usable space.

Check for the presence of:

  • skirting boards;
  • electrical outlets and switches;
  • thermostats and control panels;
  • radiators, pipes, and valves;
  • doors, cable covers, and windows;
  • ventilation grilles;
  • protruding structural or decorative elements.

Skirting boards may prevent the furniture from sitting flush against the wall and change the actual depth occupied.

Outlets, valves, and connections that require access must not be permanently covered.

4. Understand the Product Dimensions

The main dimensions of furniture are normally expressed as width, depth, and height. Check the order in which these measurements are listed on the product page.

Width: the horizontal distance from one side of the furniture to the other.

Depth: the distance from the front to the back.

Height: the vertical distance from the base to the top.

Handles, frames, feet, protruding surfaces, doors, drawers, back panels, opening systems, and other elements that may increase the footprint should also be considered.

For sofas, armchairs, and reclining seats, check both the closed and in-use dimensions.

For extendable tables, storage beds, and convertible furniture, all operating configurations must be considered.

5. Consider Doors, Drawers, and Moving Parts

The space occupied by the furniture during use may be greater than its closed footprint.

Check the space required for:

  • fully opening hinged doors;
  • opening drawers;
  • sliding doors;
  • opening storage beds;
  • extending tables and consoles;
  • reclining seats and footrests;
  • accessing internal compartments and rear parts.

Doors and drawers should not strike walls, other furniture, radiators, or architectural elements.

There must be enough space for a person to use the furniture safely and comfortably.

6. Check Doors and Entrances

Every door passed during delivery should be measured at its narrowest available point.

Measure:

  • the internal width of the passage;
  • the usable height;
  • the frame thickness;
  • the presence of thresholds or steps;
  • the maximum door opening angle;
  • handles or protruding elements;
  • the space available before and after the passage.

The width of the open door may be less than the nominal width of the opening due to the door panel, hinges, and handles.

Important: also measure any building entrance doors, gates, common entrances, elevator doors, and floor access points.

7. Measure Hallways and Corners

A hallway may be wide enough for a person to pass through upright, but not allow the rotation required at a corner.

The following should be checked:

  • the minimum hallway width;
  • the available height;
  • the rotation space at corners;
  • the presence of furniture, radiators, or decorations;
  • lamps, beams, or low false ceilings;
  • any narrowings along the route.

For long furniture or large panels, the diagonal of the person's head and the space required to tilt it may be decisive.

The entire route must be clear before the carrier arrives.

8. Measure Stairs, Landings, and Elevators

Stairs and elevators are critical points for the delivery of wardrobes, cabinets, sofas, tables, beds, and other bulky furniture.

For stairs, the following should be measured:

  • the minimum ramp width;
  • the clearance above the steps;
  • the dimensions of the landings;
  • the space available to make turns;
  • the presence of handrails, railings, or protrusions;
  • the width of the doors along the route.

For the elevator, the following should be checked:

  • the door width and height;
  • the internal width, depth, and height;
  • the stated maximum capacity;
  • the external space to bring in and rotate the person.

The elevator's internal measurements are not sufficient when the door or landing prevents the product from entering.

9. Consider the Tilting Space

Some furniture or panels must be tilted during transport, assembly, or positioning. The ceiling height must therefore allow the element to rotate.

A horizontally assembled wardrobe may require more vertical space than its final height to be lifted.

Before planning floor assembly, the following should be compared:

  • the final height of the furniture;
  • the side depth;
  • the actual ceiling height;
  • the space occupied by lamps, beams, or other obstacles.

When space is limited, the product may need to be assembled directly in a vertical position, if the instructions allow.

10. Allow Margins for Installation and Ventilation

Furniture should not be chosen with dimensions identical to the available space without considering technical margins.

Space may need to be left for:

  • leveling and adjusting the feet;
  • mounting panels and hardware;
  • rear or side ventilation;
  • cable, pipe or connection passage;
  • opening of doors and drawers;
  • cleaning and maintenance;
  • natural irregularities of the environment.

For furniture placed near damp walls, appliances or heat sources, the distances indicated in the applicable instructions must be respected.

The required margin varies depending on the product and must not be replaced by a generic standard measure.

11. Use a template on the floor

To better understand the product's footprint, you can mark out the width and depth of the furniture on the floor using removable tape.

The template allows you to check:

    remaining space for passage;
  • distance from other furniture;
  • accessibility of doors and windows;
  • position relative to outlets and radiators;
  • planned opening of doors and drawers;
  • proportion of the furniture relative to the room.

To assess the height, a removable vertical reference can be used without damaging the wall.

The template is a visual aid and does not replace an accurate check of the measurements.

12. Create a measurement sheet

An organized sheet reduces the risk of confusing the room's dimensions with those of the access points or the product.

Destination space: available width, depth and height.

Wall: baseboards, outlets, radiators and other protrusions.

Doors: actual width and height of each passage.

Hallways: minimum width and turning space.

Stairs or elevator: minimum dimensions and capacity.

Product: external dimensions, open dimensions and packaging.

Margin: space for assembly, use and maintenance.

It is advisable to keep photographs and notes until delivery and completion of assembly.

13. Measurement errors to avoid

The most common errors include:

  • measuring only one point on the wall;
  • ignoring baseboards and cable covers;
  • considering the nominal width of the door instead of the actual passage;
  • not checking stairs, elevators and landings;
  • forgetting handles, pipes and protruding parts;
  • not considering the opening of doors and drawers;
  • confusing centimeters, millimeters and meters;
  • choosing a piece of furniture the exact same dimensions as the available space.

A photograph alone does not allow you to determine the actual dimensions of a space. Images must be accompanied by verifiable measurements.

Floor plans may not show baseboards, subsequent modifications, pipes and other elements that are actually present.

14. Delivery, incompatibility and assistance

Jolnira makes deliveries in Italy through selected carriers, including DHL Express, UPS® and FedEx, subject to availability and order characteristics.

Preparation normally takes 1–3 business days. After shipping, delivery is estimated within 5–15 business days.

Standard shipping is free for orders of €199.99 or more. For orders below this amount, a fee of €5.99 is applied.

All taxes, duties and related charges applicable to standard delivery in Italy are included in the displayed price. The customer does not have to pay additional tax or customs costs upon delivery.

If a piece of furniture cannot be brought into the property due to insufficient access, even if it matches the correctly indicated dimensions, the return is normally handled as a withdrawal or return at the customer's choice.

Jolnira is responsible in cases where the incompatibility is due to substantially incorrect dimensions on the product page, a different item than the one ordered, or other non-conformity attributable to the seller.

The customer can contact Jolnira before purchase to ask for clarification on the published dimensions. However, the physical verification of the space and the delivery route remains the customer's responsibility, unless inaccurate information was provided by Jolnira.

15. Withdrawal, warranty and nature of the guide

The consumer has 14 calendar days to communicate the decision to withdraw from the contract, except for the exceptions provided by applicable regulations.

In the event of a valid withdrawal, Jolnira will refund all payments due, including the cost of the least expensive standard delivery method offered, without undue delay and in any case within 14 days from the date it is informed of the decision to withdraw.

The refund may be suspended exclusively until the product is received or until suitable proof of return is presented, whichever occurs first.

The administrative procedure is normally processed within 3–7 business days. After issuance, the credit may take approximately 5–10 business days to appear due to reasons related to the bank or payment provider.

Products sold to consumers are covered by the legal guarantee of conformity provided by applicable regulations.

This guide contains general indications and does not replace a professional measurement, the specific product instructions, or a technical assessment of walls, systems, and structures.

For custom-made furniture, complex configurations, particularly narrow stairs, or non-standard access, it is advisable to request a professional verification before confirming the order.

Jolnira Contacts and Assistance

For clarification on product dimensions, packaging, delivery of bulky furniture, or after-sales assistance, contact Jolnira.

Trade name:
Jolnira

Administrative address:
50 Short Dr
Los Alamos, NM 87544
United States

Email:
frontdesksupport@jolnira.com

Phone:
+1 (505) 121-7785

Customer service hours:
Monday to Friday: 09:00–18:00
Saturday: 09:00–13:00
Sunday and holidays: closed
Hours are in Central Italy time zone.

Communications received outside assistance hours will be reviewed on the next available business day. The address provided is an administrative contact and must not be used to send returns without prior written authorization.

© 2026 Jolnira. All rights reserved.