Furniture stability and safety

JOLNIRA · SAFETY GUIDE

Furniture Stability and Safety

Instructions for the safe assembly, fastening, loading, use and maintenance of furniture and storage systems.

Jolnira · Dedicated information for customers in Italy

Safety starts with correct installation

The stability of a piece of furniture depends on the correct combination of structure, assembly, levelling, fastening, load distribution and environmental conditions. Wardrobes, shelving units, chests of drawers, cabinets, office furniture and other tall or movable items must be installed and used in accordance with the product-specific instructions.

1. Scope of this guide

This guide contains general information about the stability and safety of furniture intended for domestic or professional environments.

The information may relate to:

  • wardrobes and closets;
  • chests of drawers and bedside tables;
  • cabinets and storage furniture;
  • shelving units and bookcases;
  • bathroom and laundry furniture;
  • office and storage furniture;
  • tables, seating and accessories with moving parts.

Product-specific features, load limits, fastening systems and assembly procedures must be checked on the product page and in the instructions provided with the item.

If there is any discrepancy between this general guide and the product-specific instructions, the product-specific instructions take precedence.

2. Pre-assembly checks

Before starting assembly, the customer must ensure that the work area is clear, stable, sufficiently spacious and adequately lit.

The following must be checked:

  • the number and integrity of the packages;
  • the presence of all panels and components;
  • the completeness of the hardware;
  • the absence of cracks, deformations or breaks;
  • that the components match the instructions;
  • the suitability of the tools;
  • the availability of the required number of people.

Panels must be placed on a clean and protected surface to prevent scratches, impacts or localised stress.

If there are damaged parts, missing components, misaligned holes or unclear instructions, assembly must be suspended and Jolnira must be contacted.

3. Support surface and levelling

The furniture must be placed on a stable, sturdy and as level as possible surface. Sloping, uneven or unstable floors may compromise alignment and increase the risk of wobbling or tipping.

After positioning, it is advisable to check:

  • uniform contact of the base with the floor;
  • correct adjustment of the feet;
  • verticality of the sides;
  • alignment of doors and drawers;
  • the absence of wobbling;
  • stability before applying loads.

Improvised spacers or supports must not be used if they may slip, compress or damage the base.

Any adjustment systems must be used exclusively within the limits specified in the instructions.

4. Wall fastening and tip-over prevention

Wardrobes, bookcases, shelving units, chests of drawers, cabinets and tall furniture can tip over when loaded incorrectly, used as support for climbing or installed without an adequate fastening system.

When the product includes or requires a tip-over prevention system, the furniture must be fastened to the wall before use. Fastening is not an optional component when it is required for product safety.

Before drilling, it is necessary to check:

  • wall type and strength;
  • the presence of hidden pipes, cables or systems;
  • suitability of screws, wall plugs and brackets;
  • correct positioning of the fastening points;
  • compatibility of the system with the furniture's weight and height.

Universal hardware may not be suitable for every wall type. For hollow masonry, plasterboard, fragile walls or non-conventional structures, it is advisable to consult a qualified installer.

The skirting board must not prevent the furniture from being positioned correctly or create an uncompensated tilt.

5. Weight distribution and load limits

Shelves, drawers, clothes rails, top surfaces and structures must be used within the load limits specified by the manufacturer or in the product specifications.

To improve stability, it is advisable to:

  • place the heaviest objects in the lower compartments;
  • distribute the weight evenly across the shelves;
  • avoid concentrated loads on the edges;
  • not overload drawers and rails;
  • not stack unstable objects on top;
  • keep the furniture's centre of gravity low.

The furniture's overall capacity does not mean that every individual shelf can support the same weight.

The load must be reduced when the furniture shows deformation, loosening, wobbling or other signs of instability.

6. Safety of doors, drawers and moving parts

Doors, drawers, sliding panels and other moving elements must be correctly installed, adjusted and used without sudden movements.

During use:

  • do not open multiple heavy drawers at the same time;
  • do not hang on doors or handles;
  • do not use open drawers as steps;
  • do not force blocked guides or hinges;
  • prevent internal objects from obstructing closure;
  • keep hands and fingers away from pinch points.

A misaligned door, deformed guide or loose hinge must be adjusted or replaced before the problem worsens.

Soft-close systems reduce impact, but do not completely eliminate the risk of pinching.

7. Shelving units, bookcases and tall furniture

Tall or narrow furniture has a higher centre of gravity and requires particular attention during installation and loading.

It is necessary to:

  • apply the specified tip-over prevention fastenings;
  • place books and heavy objects at the bottom;
  • correctly insert the shelf supports;
  • not use the structure as a ladder;
  • avoid side pushes and pulls;
  • periodically check verticality and fastenings.

Adjustable shelves must rest on all specified supports. A missing or incompletely inserted support can cause the shelf to fall.

Do not join multiple pieces of furniture using improvised systems that may transfer loads or compromise stability.

8. Glass, mirrors and fragile components

Glass shelves, glazed doors, mirrors and decorative panels must be handled with particular care during assembly, adjustment and cleaning.

For safe use:

  • do not assemble cracked or chipped glass;
  • protect edges and corners during handling;
  • use all specified supports;
  • do not overtighten clamps and hardware;
  • do not exceed the indicated load;
  • avoid impacts and thermal shocks.

Important: a glass component with a crack, deep chip or edge damage must be removed from use and reported to customer service.

9. Safety in the presence of children and pets

In homes with children, pets or vulnerable people, additional precautions must be taken to reduce the risk of tip-overs, entrapment, falling objects or access to hazardous substances.

It is advisable to:

  • fasten tall furniture and chests of drawers to the wall;
  • not place attractive objects on upper shelves;
  • prevent doors and drawers from being used as steps;
  • store detergents and hazardous substances in protected compartments;
  • use locking devices when necessary;
  • protect exposed edges according to the environment;
  • not leave components or hardware accessible during assembly.

Adult supervision does not replace correct fastening and safe installation of the furniture.

Additional safety systems must be compatible with the product and must not damage its structural elements.

10. Tables, seating and support surfaces

Tables, desks, benches, chairs and other furniture must be used exclusively for their intended purpose.

The following are not permitted:

    standing on tables, chairs, or surfaces not intended for such use;
  • sitting on shelves, armrests, or non-load-bearing edges;
  • applying excessive side loads;
  • using the furniture with loose legs or joints;
  • dragging the furniture while it is loaded;
  • modifying the structure without authorization.

Extendable tables and transformable furniture must be opened and closed according to the instructions, ensuring that the mechanisms are fully locked before use.

Seats must be placed on stable floors and checked periodically for any loosening.

11. Moving and Relocating

Assembled furniture must not be dragged or tilted without first checking its weight, structure, and moving method.

Before moving, it is advisable to:

    completely empty all compartments and drawers;
  • remove movable shelves and fragile parts;
  • close or secure doors and drawers;
  • safely disconnect the anti-tip system;
  • use an adequate number of people;
  • lift the furniture from structurally suitable points.

The furniture must be leveled again and secured to the wall after each move.

Top panels, doors, handles, and shelves must not be used as lifting points unless expressly indicated.

12. Periodic Checks and Maintenance

Vibrations, daily use, environmental changes, and moving may loosen screws, hinges, guides, supports, and fastening systems over time.

Fastening: check brackets, straps, screws, and wall plugs.

Structure: check for wobbling, deformation, and joints.

Doors: check hinges, alignment, and closing.

Drawers: check guides, stops, and sliding.

Shelves: check supports, deflection, and load.

Base: check feet, leveling, and floor.

Hardware should be tightened moderately, avoiding excessive force that could damage panels or threads.

Worn, deformed, or damaged components must be replaced with suitable spare parts before continuing use.

13. Risk Signs and Suspension of Use

The furniture must not be used when it presents conditions that could compromise the safety of people or stored objects.

Use must be suspended in the presence of:

    abnormal wobbling or visible tilting;
  • open joints or deformed panels;
  • loose wall fastenings;
  • severely bowed shelves;
  • partially detached hinges or guides;
  • cracked or chipped glass;
  • damaged legs, feet, or supports;
  • unusual structural noises during use.

Objects must be removed safely, and the area must be kept clear until the problem is checked.

The customer must not perform improvised structural repairs that could conceal or aggravate the risk.

14. Delivery, Parcel Check, and Transport Damage

Jolnira makes deliveries in Italy through selected carriers, including DHL Express, UPS® and FedEx, subject to availability and order characteristics.

Order preparation normally takes 1–3 business days. After shipping, delivery is estimated within 5–15 business days.

Standard shipping is free for orders of €199.99 or more. For orders below this amount, a shipping cost of €5.99 is applied.

All taxes, duties, and related charges applicable to standard delivery in Italy are included in the displayed price. The customer must not incur additional tax or customs costs upon delivery.

At the time of delivery, it is advisable to:

    check the number of parcels;
  • check for impacts, punctures, and crushing;
  • photograph any packaging anomalies;
  • make a specific reservation, when possible;
  • keep packaging and labels;
  • do not assemble visibly damaged structural components.

Cracks, deformations, damaged welds, missing hardware, cracked glass, or other problems that could compromise stability must be reported to Jolnira without undue delay.

The report should include the order number and photographs of the product, packaging, and shipping label.

15. Right of Withdrawal, Warranty, and Assistance

The consumer has 14 calendar days to communicate the decision to withdraw from the contract, except for the exceptions provided by applicable regulations.

In the event of a valid exercise of withdrawal, Jolnira will refund all payments due related to the products concerned, including the cost of the least expensive standard delivery method offered, without undue delay and in any case within 14 days from the date on which it is informed of the decision to withdraw.

Jolnira may suspend the refund exclusively until the product is received or until suitable proof of return is presented, depending on which event occurs first.

The administrative procedure is normally processed within 3–7 business days. After issuance, the credit may take approximately 5–10 business days to appear due to reasons depending on the bank, card issuer, or payment provider.

Products sold to consumers are covered by the legal guarantee of conformity provided by applicable Italian and European Union regulations.

Original structural defects, non-conforming components, missing hardware, or transport damage must be documented and reported to customer service.

Damage caused by incorrect assembly, failure to secure to the wall, overloading, unsuitable flooring, unauthorized modifications, improper handling, or failure to follow instructions may not constitute original defects.

This guide provides general information and does not replace the specific product instructions or the assessment of a qualified installer when required by the conditions of the wall, environment, or structure.

Jolnira Contacts and Assistance

For clarifications on assembly, fastening, stability, missing parts, structural damage, delivery, or after-sales assistance, contact Jolnira.

Trade name:
Jolnira

Administrative address:
50 Short Dr
Los Alamos, NM 87544
United States

Email:
frontdesksupport@jolnira.com

Telephone:
+1 (505) 121-7785

Customer service hours:
Monday to Friday: 09:00–18:00
Saturday: 09:00–13:00
Sunday and holidays: closed
Hours refer to Central Italy time zone.

Communications received outside assistance hours will be reviewed on the first available business day. The address provided is an administrative address and must not be used to send returns without prior written authorization.

© 2026 Jolnira. All rights reserved.